How your system is performing, what the weather is doing, and whether cleaning or an inspection may be useful. Every figure says where it comes from.
20 panels recorded for Demo Home System (NOT REAL).
Per-panel readings come from optimizers or micro-inverters. With a string inverter, Solink reads the array as a whole.
With optimizers or micro-inverters on each panel, this page shows:
Energy from each individual panel over the day, week or month.
Normal, underperforming or fault, per panel, instead of one figure for the whole array.
Each panel against the array average, so an outlier is obvious.
Panels that stay consistently below their neighbours, which can indicate shading, soiling or a fault.
A standard string inverter reports one total for the whole array, so per-panel figures cannot be derived from it. Panel-level readings come from power optimisers or micro-inverters fitted to each panel, or from a monitoring platform that exposes them.
Solink only shows per-panel numbers that a device has measured. Estimating them would make a faulty panel look healthy, or a healthy one look faulty.
With a string inverter, whole-system signals on the Overview page and a photo check on the Inspection page cover the array.